Local LLM Hardware Cost: When an API Is Cheaper
A usable local model needs a GPU with plenty of memory, a decent host machine and a power bill. Spread over three years, that is far more per month than most people spend on tokens.


Key points
- Memory on the GPU, not raw speed, sets what you can run and what you pay.
- With the illustrative build below, break-even is about 232M tokens a month, or roughly 18 hours of generation every day.
- An API wins at low and bursty volume; local wins for constant heavy use, privacy needs and offline work.
- Treat every hardware price here as a placeholder and check the current market.
What drives the price
The local llm hardware cost is mostly one component: the graphics card, and specifically how much video memory it has. The model weights have to fit in VRAM, or in a slower mix of VRAM and system RAM. A rough rule for the weights alone is parameters times bits per weight divided by eight. A model with 8 billion parameters at 4-bit quantization needs about 4 GB. A 70 billion model at 4-bit needs about 35 GB. On top of that you need room for the KV cache, which grows with context length, and some overhead.
That is why the price curve is steep. A card with 12 GB of memory runs small models. A 24 GB card runs mid-size models comfortably. Anything larger means two cards or workstation hardware. Speed matters less than capacity: a slower card that fits the model beats a faster card that does not.
A budget, a mid-range and a large build
The prices below are illustrative assumptions, not quotes. Used and new prices move constantly, so replace them with what you actually find. The point is the shape of the calculation.
| Item | Small build | Mid build | Large build |
|---|---|---|---|
| GPU memory | 12 GB | 24 GB | 2 x 24 GB |
| GPU (assumed) | $350 | $800 | $1,600 |
| CPU, board, 32 to 64 GB RAM, SSD (assumed) | $500 | $600 | $900 |
| Power supply, case, cooling (assumed) | $150 | $100 | $200 |
| Total (assumed) | $1,000 | $1,500 | $2,700 |
If you already own a gaming PC with a suitable card, your marginal hardware cost is zero and the rest of this article shifts a lot in favor of local. If you are buying new, the table is closer to the truth.
Turn the purchase into a monthly cost
Spread the build over a realistic life, and add power. The mid build at $1,500 over 36 months is $41.67 a month. Add electricity for a machine that generates about four hours a day: using 450 W under load, 60 W idle and $0.15 per kWh that is $13.50 a month. Total: $55.17 a month.
| Build | Hardware per month (36 months) | Power per month (4 h/day) | Total per month |
|---|---|---|---|
| Small | $27.78 | $13.50 | $41.28 |
| Mid | $41.67 | $13.50 | $55.17 |
| Large | $75.00 | $23.40 | $98.40 |
The large build's power figure assumes 800 W under load and 100 W idle: 3.2 kWh plus 2.0 kWh a day is 5.2 kWh, times 30 is 156 kWh, times $0.15 is $23.40.
The break-even against per-token pricing
Now convert that monthly figure into tokens. Assume chat traffic with three input tokens per output token. One million output tokens plus three million input tokens costs 1 x $0.50 + 3 x $0.15 = $0.95 for four million tokens, a blended $0.2375 per 1M. For the mid build:
- $55.17 divided by $0.2375 per 1M is about 232M tokens a month at break-even.
- A quarter of that is output: roughly 58M output tokens.
- At 30 tokens per second, one machine would produce about 77.8M output tokens if it ran flat out for 30 days (2.592M seconds times 30).
58M output tokens at 30 per second takes 1.94M seconds, about 538 hours, which is 17.9 hours of generation every day. A single person typing prompts does not do that. A batch pipeline or a service with many users might.
Where local still makes sense
The break-even says the API is cheaper for most individuals. It does not say local is pointless. Reasons to buy hardware anyway:
- You already own the card. Then only electricity counts.
- Constant load. A pipeline that runs all day, such as bulk classification, can keep a GPU busy enough to pass the break-even.
- Offline or air-gapped work. No network, no per-token bill, no data leaving the building.
- Experiments with weights. If you want to change quantizations, merge models or run your own fine-tunes, you need the files on your disk.
For a wider view of what LLM usage costs in general, see the page on how much an LLM costs. Reasons to rent instead: bursty use, many experiments with different sizes, a need for long context without buying more VRAM, and not wanting to maintain drivers and inference servers. The hosted option here has a 100,000 token context window, which would need a lot of memory for the KV cache at home.
Three people, three answers
Numbers are easier to trust when they match a real situation. Here are three profiles, priced at $0.15 and $0.50 per 1M tokens with the three-to-one input ratio.
- The hobbyist chats for an hour or two a day and sends about 10M tokens a month in total. At the blended $0.2375 per 1M that is $2.38. Compare that with $41.28 a month for even the small build. The API is about seventeen times cheaper.
- The developer runs an editor assistant and test scripts, around 60M tokens a month: $14.25 by the API. The mid build costs $55.17 a month, so the API still wins by a wide margin unless the card was already owned.
- The batch operator classifies documents around the clock, 400M tokens a month: $95.00 by the API. The mid build at $55.17 is cheaper if it can actually process that volume, but at 30 tokens per second of output it tops out near 77.8M output tokens a month, about 311M tokens in total with the same ratio. So the operator needs a second card or must accept lower volume, which pushes the local cost up.
The pattern is consistent: the API wins until usage is constant and large, and local capacity then becomes the bottleneck. Concurrency also differs. A full key here allows 8 concurrent requests, while a single desktop GPU usually serves one request at a time at full speed.
Spending less, and what the receipt misses
Ways to spend less on hardware
- Buy used. Previous-generation cards with 24 GB of memory are often the best value per gigabyte. Check the seller, and test the card under load on arrival.
- Offload layers. Inference engines such as llama.cpp can keep part of a model in system RAM. It runs, but slower, so only use this when speed does not matter.
- Pick a smaller model. A well-tuned 8B model on a 12 GB card covers many everyday tasks. Pay for size only when a task needs it.
- Rent GPU time by the hour. Cloud GPU rentals avoid the purchase but have their own hourly rates, so check their current pricing and compare it with per-token billing.
Hidden costs people forget
- Depreciation. GPUs lose resale value as newer cards arrive. The 36 month life above is a guess.
- Failure and replacement. A dead power supply or fan is a surprise bill.
- Upgrades. New open-weight models tend to be larger. A card that fits today's favorite may not fit next year's.
- Time. Setup, updates and debugging are real hours. If you value them at anything, add them.
- Noise and heat. A 450 W machine in a small room is audible and warm.
None of these show up on a receipt, which is why a rig often looks cheaper in people's heads than it is.
Check your own break-even
Pick your numbers and run this. It takes your all-in monthly local cost and prints the monthly token volume where the API matches it, at this service's prices.
local_monthly = 55.17 # hardware per month + electricity
in_price, out_price = 0.15, 0.50 # dollars per 1M tokens
ratio = 3 # input tokens per output token
blended = (ratio * in_price + out_price) / (ratio + 1)
total_m = local_monthly / blended
print(f"Break-even: {total_m:.0f}M tokens a month ({total_m/(ratio+1):.0f}M output)")If your real volume is far below that, use the API. To measure your volume, claim the trial credit on the API key page, run your real prompts against https://api.uncensoredlocalllm.com/v1 with model uncensored, and read the token usage in each response. See the docs for the request format and the pricing page for top-ups.
More guides
Questions and answers
How much does a PC that can run an LLM locally cost?
It depends on the model size you want. With the placeholder prices in this article, a small build is about $1,000 and a mid build with a 24 GB card about $1,500. Check current market prices before you plan.
Do I need a GPU to run a local LLM?
No, small models run on a CPU with enough RAM, but generation is much slower. A GPU with enough memory for the weights is what makes it practical.
When is a local LLM cheaper than an API?
When the machine is busy many hours a day, when you already own the hardware, or when you need offline operation. At the prices in this article the mid build breaks even near 18 generating hours a day.
Can I try an API before buying hardware?
Yes. New users can claim $0.50 of trial credit without a card and run their real prompts to see the quality and cost.
uncensoredlocalllm.com
Your key is one form away
Create an account, copy the key, change the base URL. That is the whole setup.